- mar. 17 nov. 2015 10:59
#171578
Bonjour,
J'ai mon ordinateur sous Windows 10. J'essaie de créer un disque de réparation système. La sauvegarde doit se faire sur un CD. J'ai chaque fois le même message d'erreur stipulant que mon disque n'est pas vierge. J'en ai essayé plusieurs, je les ai formatés et le résultat est toujours le même. Est il possible de programmer la sauvegarde sur un disque dur externe ?
J'ai essayé de graver autre chose et voici ce que j'obtiens comme rapport :
Windows Vista 6.2
AMD64
Wow64Process
WinAspi: -
NT-SPTI used
Nero Version: 9.4.27.100
Internal Version: 9, 4, 27, 100
(Nero Express)
Recorder: <TSSTcorp CDDVDW SH-222BB>Version: SB00 - HA 1 TA 0 - 9.4.27.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 1536kB
Bus Type : via Inquiry data
CD-ROM: <TSSTcorp CDDVDW SH-222BB >Version: SB00 - HA 1 TA 0 - 9.4.27.100
Adapter driver: <Serial ATA> HA 1
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
TSSTcorp CDDVDW SH-222BB E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.11.2015
CD-ROM (ISO)
11:16:42 #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:16:42 #2 Text 0 File Isodoc.cpp, Line 7009
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:16:42 #3 Text 0 File Burncd.cpp, Line 3242
TSSTcorp CDDVDW SH-222BB
Super Link activés
11:16:42 #4 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)
11:16:42 #5 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 170055 (0x00029847)
11:16:43 #6 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 0. Length: 600 -> 598.
11:16:43 #7 Text 0 File Burncd.cpp, Line 3572
Turn on Track-At-Once, using CD-R/RW media
11:16:43 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 3. Length: 600 -> 598.
11:16:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 3. Length: 600 -> 598.
11:16:43 #10 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 359846
Last address to be written: 170654
11:16:43 #11 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)
11:16:43 #12 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: TSSTcorp CDDVDW SH-222BB;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
11:16:43 #13 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:16:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 600 (600) = #600/0:8.0
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [E: TSSTcorp CDDVDW SH-222BB]
--------------------------------------------------------------
11:16:43 #15 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [E: TSSTcorp CDDVDW SH-222BB] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 3 to 3: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1536000, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
169905 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
169905 | 3 | 0 | 0x41 | 0 | 0 | 0x00
170055 | 3 | 1 | 0x41 | 600 | 170055 | 0x00
170655 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:16:43 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 3. Length: 600 -> 598.
11:16:43 #17 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
11:16:43 #18 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
11:16:43 #19 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
11:16:43 #20 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.
11:16:43 #21 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
11:16:43 #22 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 48x (7 200 Ko/s)
11:16:43 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #170055
11:16:43 #24 Text 0 File MMC.cpp, Line 21767
Set BUFE: Super Link -> ON
11:16:43 #25 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
11:16:43 #26 SPTI -1047 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
CDB Data: 0x2A 00 00 02 98 47 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 64
Buffer x190b8040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11:16:43 #27 CDR -1047 File Writer.cpp, Line 306
Illegal mode for this track
E: TSSTcorp CDDVDW SH-222BB
11:16:43 #28 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
E: TSSTcorp CDDVDW SH-222BB
11:16:43 #29 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack
11:16:43 #30 Text 0 File MMC.cpp, Line 17140
<TSSTcorpCDDVDW SH-222BB > start Close Track #4
11:16:43 #31 SPTI -1176 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
11:16:43 #32 CDR -1176 File WriterStatus.cpp, Line 375
Session fixation error
E: TSSTcorp CDDVDW SH-222BB
11:16:43 #33 TRANSFER -19 File WriterStatus.cpp, Line 375
Could not perform Fixation
11:16:43 #34 Text 0 File WriterStatus.cpp, Line 384
falling back to disc fixation
11:16:43 #35 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0
11:16:43 #36 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 48x (7 200 Ko/s)
11:16:43 #37 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:16:48 #38 Text 0 File Cdrdrv.cpp, Line 11595
DriveLocker: UnLockVolume completed
11:16:48 #39 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
cordialement.
J'ai mon ordinateur sous Windows 10. J'essaie de créer un disque de réparation système. La sauvegarde doit se faire sur un CD. J'ai chaque fois le même message d'erreur stipulant que mon disque n'est pas vierge. J'en ai essayé plusieurs, je les ai formatés et le résultat est toujours le même. Est il possible de programmer la sauvegarde sur un disque dur externe ?
J'ai essayé de graver autre chose et voici ce que j'obtiens comme rapport :
Windows Vista 6.2
AMD64
Wow64Process
WinAspi: -
NT-SPTI used
Nero Version: 9.4.27.100
Internal Version: 9, 4, 27, 100
(Nero Express)
Recorder: <TSSTcorp CDDVDW SH-222BB>Version: SB00 - HA 1 TA 0 - 9.4.27.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 1536kB
Bus Type : via Inquiry data
CD-ROM: <TSSTcorp CDDVDW SH-222BB >Version: SB00 - HA 1 TA 0 - 9.4.27.100
Adapter driver: <Serial ATA> HA 1
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
TSSTcorp CDDVDW SH-222BB E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.11.2015
CD-ROM (ISO)
11:16:42 #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:16:42 #2 Text 0 File Isodoc.cpp, Line 7009
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:16:42 #3 Text 0 File Burncd.cpp, Line 3242
TSSTcorp CDDVDW SH-222BB
Super Link activés
11:16:42 #4 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)
11:16:42 #5 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 170055 (0x00029847)
11:16:43 #6 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 0. Length: 600 -> 598.
11:16:43 #7 Text 0 File Burncd.cpp, Line 3572
Turn on Track-At-Once, using CD-R/RW media
11:16:43 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 3. Length: 600 -> 598.
11:16:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 3. Length: 600 -> 598.
11:16:43 #10 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 359846
Last address to be written: 170654
11:16:43 #11 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)
11:16:43 #12 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: TSSTcorp CDDVDW SH-222BB;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
11:16:43 #13 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:16:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 600 (600) = #600/0:8.0
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [E: TSSTcorp CDDVDW SH-222BB]
--------------------------------------------------------------
11:16:43 #15 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [E: TSSTcorp CDDVDW SH-222BB] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 3 to 3: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1536000, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
169905 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
169905 | 3 | 0 | 0x41 | 0 | 0 | 0x00
170055 | 3 | 1 | 0x41 | 600 | 170055 | 0x00
170655 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:16:43 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1012
Removed 2 run-out blocks from end of track 3. Length: 600 -> 598.
11:16:43 #17 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
11:16:43 #18 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
11:16:43 #19 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
11:16:43 #20 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.
11:16:43 #21 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
11:16:43 #22 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 48x (7 200 Ko/s)
11:16:43 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #170055
11:16:43 #24 Text 0 File MMC.cpp, Line 21767
Set BUFE: Super Link -> ON
11:16:43 #25 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
11:16:43 #26 SPTI -1047 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
CDB Data: 0x2A 00 00 02 98 47 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 64
Buffer x190b8040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11:16:43 #27 CDR -1047 File Writer.cpp, Line 306
Illegal mode for this track
E: TSSTcorp CDDVDW SH-222BB
11:16:43 #28 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
E: TSSTcorp CDDVDW SH-222BB
11:16:43 #29 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack
11:16:43 #30 Text 0 File MMC.cpp, Line 17140
<TSSTcorpCDDVDW SH-222BB > start Close Track #4
11:16:43 #31 SPTI -1176 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
11:16:43 #32 CDR -1176 File WriterStatus.cpp, Line 375
Session fixation error
E: TSSTcorp CDDVDW SH-222BB
11:16:43 #33 TRANSFER -19 File WriterStatus.cpp, Line 375
Could not perform Fixation
11:16:43 #34 Text 0 File WriterStatus.cpp, Line 384
falling back to disc fixation
11:16:43 #35 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0
11:16:43 #36 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 48x (7 200 Ko/s)
11:16:43 #37 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:16:48 #38 Text 0 File Cdrdrv.cpp, Line 11595
DriveLocker: UnLockVolume completed
11:16:48 #39 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
cordialement.